Does Aluminum Rust Or Corrode?

Aluminium Corrosion Resistance

Alkali is one of the few substances that attack oxide films and therefore cause aluminum corrosion. Although metals can be safely used in the presence of certain weak bases with the help of corrosion inhibitors, direct contact with alkaline substances should generally be avoided.

The corrosion resistance of some aluminum alloys is not as good as others, especially some high-strength aluminum alloys. However, by covering the exposed surface with a thin layer of pure aluminum or an alloy with higher corrosion resistance, such alloys can be effectively protected from most corrosion effects.

Attention should also be mentioned. In the presence of electrolyte, avoid direct contact with certain other metals; otherwise, galvanic corrosion of aluminum may occur near the contact area. If other metals must be fixed to aluminum, it is recommended to use bituminous paint or insulating tape.

Corrosion Resistance of Aluminium and Aluminum Alloys

1xxx series, unalloyed (pure) aluminium, purity ≥ 99.00%, have excellent corrosion resistance.
2xxx series, Copper is the main alloying element, these alloys do not have good corrosion resistance like most aluminum alloys, and under certain conditions, they may be subject to intergranular corrosion. Therefore, these alloys are usually coated with 6xxx series high-purity alloys or magnesium-silicon alloys in sheet form to provide electrical protection for the core material, thereby greatly improving corrosion resistance.
3xxx series, Manganese is the main alloying element in this type of alloy. They have high corrosion resistance. The corrosion resistance in the atmosphere is similar to that of industrial pure aluminum, the same as pure aluminum in seawater. Better than pure aluminum in dilute hydrochloric acid; No such alloys have a tendency to stress corrosion cracking.
4xxx series, silicon is the main element, but silicon has the least influence on the corrosion resistance of these alloys. This is due to the fact that silicon particles are highly polarized, resulting in low corrosion current density.
5xxx series, Magnesium is the main alloying element, have pitting corrosion, intergranular corrosion, stress corrosion and denudation tendency. As the magnesium content increases, the tendency of pitting corrosion increases; as the amount of cold working deformation increases, the susceptibility to stress corrosion and denudation increases.
6xxx series, contains approximate proportions of silicon and magnesium to form magnesium silicides, which makes them heat-treatable and has good corrosion resistance. The main one in this series is 6061 aluminum alloy.

Corrosion of Aluminum and Aluminum Alloys

Pitting Corrosion: For aluminum, the most common pitting corrosion is halide ion, and chloride ion (Cl-) is the most common in use, such as NaCl (saltwater, the main source is seawater).

Galvanic Corrosion: Aluminum and its alloys will fail due to galvanic corrosion, so avoid contact of aluminum with more cathode metal. If such contact is required, protective measures should be taken to minimize sacrificial corrosion of aluminum. In many environments, aluminum can come into contact with chromium or stainless steel, only slightly accelerating corrosion.

Intergranular Corrosion is selective corrosion of grain boundaries or close adjacent areas, but no obvious corrosion to the grains themselves. Intergranular corrosion is caused by the potential difference between the grain boundary region and adjacent grains.

Stress-Corrosion Cracking (SCC): SCC in aluminum alloys is usually intergranular. Only aluminum alloys containing large amounts of soluble alloying elements (mainly copper, magnesium, silicon and zinc) are susceptible to SCC. For most commercial alloys, tempering properties that are highly resistant to SCC in most environments have been developed.

Does Aluminum Rust in Water

Aluminum hardly rusts in water, because aluminum will form a thin aluminum oxide film on the surface in the air to prevent further rust. When aluminum is placed in water, this passivation film isolates the water from the internal metal aluminum, so aluminum will not rust in water.

Does Aluminum Rust in Saltwater

Aluminum can rust in saltwater because the saltwater contains a large amount of chloride ions (Cl-), which can destroy the oxide film on the aluminum surface, causing pitting and intergranular corrosion.